Using the Hycrete IntegraTek Waterproofing System can eliminate the need for the waterproofing subcontractor and any installation issues of external membranes or coatings. Integral waterproofing streamlines the construction process and reduces time of construction - saving weeks or months on a job. Hycrete Element, the technology component of the IntegraTek System, lowers the costs of managing a project and is not susceptible to weather delays, as conventional waterproofing solutions may be.

Hycrete Element treated concrete is tough and cannot be damaged. Using Hycrete Element expands lay down areas by allowing for early backfill for below grade work and allowing use of podium decks (with no protection needed). By reducing water-penetration problems, call-backs, and potential litigation associated with membrane installation, damage, or failure, the Hycrete IntegraTek System provides general contractors with the peace of mind from using a constructable and reliable waterproofing solution backed by a performance-based warranty (conditioned on project use review and acceptance).

Use of Hycrete Element in conjunction with standard specified membranes provides for belt and suspenders protection, the ability to stop leaks from the inside, and demonstrates the contractor has taken all reasonable measures to mitigate water penetration issues.

Benefits to the Contractor:

• Reduced Construction Costs
• Shortened Construction Timeline
• Simplified Construction Process
• Sustainable Construction
• Reduced Risk

* Mixes incorporating Hycrete can be expected to have slightly lower compressive strengths compared to control mixes.  This is easily compensated by normal means, such as the use of water reducers, increased cement, or lowering the W/C ratio (no more than 0.42 is recommended).  Trial batches should be performed and appropriate adjustments should be made to the mix design prior to use.